MADE IN DENMARK
ECO2SAVER:
PROTECTS THE ENGINE
PROTECTS THE PARTICULATE FILTER
PROTECTS THE OIL
GIVES A BETTER ACCELERATION
EMISSIONS 0.01%
STOP BLACK SMOKE
MADE IN DENMARK
WELCOME TO THE EMISSION REDUCING TECHNOLOGY OF THE FUTURE!
Eco2Saver & EkoMax – Effective reduction of harmful emissions
With us you will find advanced solutions for optimizing your engine and reducing emissions. With Eco2Saver and EkoMax you get two revolutionary systems, each of which contributes to a cleaner and more efficient engine.
ECO2SAVER FUEL SAVING SYSTEM
EKOMAX – INNOVATIVE HYDROGEN SYSTEM
for maximum purification
Eco2Saver – Powerful performance and emission reduction Eco2Saver works by optimizing the engine combustion process, resulting in:Reduced fuel consumptionLower emissions
(down to 0.01% harmful substances) Complete elimination of black smoke Extended engine and particulate filter life Improved acceleration and traction – Perfect for a sporty driving experience Installation: Eco2Saver is installed directly on the fuel system and ensures immediate results.
EkoMax uses hydrogen technology to clean the engine and reduce harmful emissions to a minimum:
Reduction of toxic substances in emissions to 0.01%
Effective removal of black smoke
Optimized fuel economy
Protection of engine and particulate filter
Smoother engine running and better traction
Installation: EkoMax is integrated into the engine's intake system and ensures cleaner combustion from the first start.
Read more about EkoMax here
Two systems – one mission: A cleaner and stronger engine
Both Eco2Saver and EkoMax ensure maximum performance and minimal pollution. Whether you want more sporty driving or fuel economy with optimal emission reduction, we have the solution for you!
Contact us today and experience the difference!
📞 Contact us +45 60 24 62 12 | 🌐 www.eco2saver.com
Technical Report: ECO2SAVER
Optimization of VW Golf 5 1.9 TDI (105 hp) with Eco2Saver
Introduction
This report presents the significant improvements achieved by installing Eco2Saver on a VW Golf 5 1.9 TDI (105 hp). The objective was to enhance fuel efficiency, reduce emissions, and improve engine performance. Tests were conducted before and after installation, and the results were verified through an emissions test at BOSCH.
Before and After Installation of Eco2Saver
Technical Review of Eco2Saver
1️⃣ Improved Fuel Atomization and Combustion
Eco2Saver optimizes the molecular structure of the fuel, resulting in more uniform atomization in the engine's injection system. This ensures more complete combustion, reduces soot formation, and improves energy transfer.
✅ Effect: The engine converts a higher percentage of fuel into energy, leading to reduced fuel consumption and cleaner exhaust emissions.
2️⃣ Increased Engine Efficiency and Higher Performance
Cleaner combustion provides a more efficient power output, increasing the top speed from 175 km/h to 210 km/h without increasing fuel consumption.
✅ Effect: The engine runs more efficiently and delivers more power with the same amount of fuel.
3️⃣ Lower Emissions – Near-Zero Pollution
The BOSCH emissions test showed only 0.01% pollutant particles, an impressively low value for a diesel engine. The improved combustion process minimizes the formation of NOx, CO, and particulate emissions.
✅ Effect: Eco-friendly operation with a drastic reduction in harmful emissions.
4️⃣ Improved Fuel Efficiency – From 560 km to 960 km on a Full Tank
By enhancing combustion efficiency, the car can now travel 960 km on a single 55L tank, compared to 560 km before. This results in a fuel economy of 17.5 km/L, an improvement of 78%.
✅ Effect: Significant fuel savings and lower operating costs.
How Are These Improvements Achieved?
🔹 More efficient atomization = Less energy loss & better performance
🔹 Better air-fuel mixture = More power per liter of diesel
🔹 Cleaner engine combustion = Less internal resistance & lower emissions
🔹 Increased efficiency in power transfer = Faster acceleration & higher speed
Conclusion – A Revolution in Fuel Optimization?
The achieved results indicate that Eco2Saver can have a groundbreaking impact on combustion engine performance, fuel economy, and emissions. If this technology can be scaled and widely implemented, it could provide an eco-friendly solution that extends the lifespan of existing diesel and gasoline engines while drastically reducing our carbon footprint.
🚗 More speed – ⛽ Less consumption – 🌱 Near-zero emissions
Recommendations and Next Steps
✅ Further testing and measurements on more car models
✅ Long-term testing to validate durability and reliability
✅ Potential implementation on a larger scale (fleets, trucks, agricultural machinery)
💡 Interested in a demonstration or further analysis? Contact us for more details!
 |  |  |  |
|---|
